Type ELK-MI VA Twin Conductor

Brand: ELTHERM Category: HIGH TEMPERATURE MI TYPE MINEREL INSULATED CABLES

High Temperature Mi Type Minerel Insulated Cables - Type ELK-MI VA Twin Conductor

Rated 5.00 out of 5 based on 1 customer rating

Used in Chemical and Petrochemical, Oil and Gas Industry, Industrial processes, Mobile processing plants and Vacuum processes.

Type ELK-MI VA Twin Conductor

MI-trace heaters consist of a twin conductor series trace heater connected to mineral-insulated cold leads (with 2,0, 2,5, 3,3 or 5,0 mm² copper conductor) by means of a clean laser seal (splice). The outer sheath is made of high quality stainless steel 1.4541 (AISI 321). The free end of the cold lead is potted and fitted with a flexible lead (cross section matching that of the cold lead conductor) for power connection and a 1,5 mm² lead for earthing. A com-pression ring flameproof stainless steel gland 1.4404 (AISI 316L) threaded M20x1.5 or M25x1.5 is fitted at the end of each cold lead and prevented from possible loss by the potted end seal. MI trace heaters are supplied prefabricated by eltherm and ready for installation. Each unit comes with a type plate bearing all information / markings. Maximum maintain temperatures are derived from the maximum sheath temperature determined by eltherm and are also indicated on the type plate.

Applications:

Chemistry and Petrochemistry
Oil and Gas Industry
Industrial processes
Mobile processing facilities
Vacuum processes

Benefits:

100% homogeneous design
No filling holes
Twin design
High temperature resistance
Maximum resistance to chemicals
High power output
Protection against stress corrosion
Resistant against moisture

Approvals:

Classification : II 2 G Ex 60079-30-1 db eb IIC Gb II 2 D Ex 60079-30-1 tb IIIC Db
Certification : FM15ATEX0046X FM18US0191X FM18CA0089X IECEx FME 15.0009X

Product Selection:

Quantity:

Product of your choice :

Product Description

Type ELK-MI VA Twin Conductor

1) Bus wire	Nichrome R, KP, Constantan, Alloy 60 or Copper
2) Insulation	Magnesium oxide (MgO) to ASTM E1652 standard
3) Outer jacket	Stainless Steel 1.4541 (AISI 321)
4) Cable gland	Stainless Steel M20 x 1.5 / M25 x 1.5

TECHNICAL INFORMATION
Operating temperature	up to 700 °C
Ambient temperature	-60 °C to +60 °C
Nominal output	up to 250 W/m *
Nominal voltage	up to 500 V AC
Bending radius, min.	Diameter x 6
Installation temperature, min.	– 60 °C
Protective conductor connection	Protective connection integrated
Protection rating / protection class	IP65 / Protection class I
Power connection line	1/2 x 0.50 m, ø 2.5 mm² / 6 mm²

Type ELK-MI VA Twin Conductor

Applications:

Chemistry and Petrochemistry
Oil and Gas Industry
Industrial processes
Mobile processing facilities
Vacuum processes

Benefits:

100% homogeneous design
No filling holes
Twin design
High temperature resistance
Maximum resistance to chemicals
High power output
Protection against stress corrosion
Resistant against moisture

Approvals:

Classification : II 2 G Ex 60079-30-1 db eb IIC Gb II 2 D Ex 60079-30-1 tb IIIC Db
Certification : FM15ATEX0046X FM18US0191X FM18CA0089X IECEx FME 15.0009X