SRM/E -150 °C - 215 °C Self Limiting Parallel Heating Tape SRM/E
Self-Regulating Heating Cable - SRM/E -150 °C - 215 °C Self Limiting Parallel Heating Tape SRM/E
Chromalox SRM/E self-regulating heating cable provides safe, reliable heat tracing for process temperature maintenance and freeze protection of pipes, valves, tanks and similar applications.
SRM/E -150 °C - 215 °C Self Limiting Parallel Heating Tape SRM/E
Features:
- Energy efficie nt, self-regulating SRM/E uses less energy when less heat is required.
- Easy to install, SRM/E can be cut to any length (up to max. circuit length) in the field.
- Field splices can be performed easily in minutes with no scrap or wasted cold sections.
- With lower installed cost than steam tracing, SRM/E features less maintenance expense and downtime
- SRM/E can be overlapped without burnout, which simplifies heat tracing of in-line process equipment such as valves, elbows and pumps.
- Because SRM/E is self-regulating, overtem - perature conditions are minimized.
- Chromalox termination, splice, tee and end seal kits reduce install ation time
Approvals:
Factory Mutual (FM) Approved, UL Listed, and CSA certified for ordinary areas. ATEX, IECEx, FM, and CSA Approved for hazardous (classified) areas when used with U Series, HL, DL, and EL accessories.
CSA and FM Approved:
- Class I, Div. 1* & 2 Groups A*, B, C, D (gases, vapors)
- Class II, Div. 1*& 2 Groups E*, F, G (combustible dust)
- Class III, Div. 2 (easily ignitable fibers and fillings
- 5 and 8 Watt Rated T3 Temperature Class
- 10, 15, and 20 Watt Rated T2D Temperature Class
CSA Only:
• CT overjacket only
ATEX Approved:
• CE2903 II 2 G Ex eb IIC T* Gb Ta -60˚C to 195˚C
IECEx Approved:
• ITS 07.0018X Ex eb II T* Gb Ta -60˚C to 195˚C
Note 1 Exception — Cable Surface Temperature shall not exceed 190°C in Class II, Div. 2, Group F; 165°C in Class II, Div. 2 Group G.
Construction:
- Twin 16 AWG Copper Buss Wires — Provide reliable electrical current capability
- Semiconductive Polymer Core Matrix — “Self-Regulating” component of the cable, its electrical resistance varies with temperature. As process temperature drops, the core’s heat output increases; as process temperature rises, the heat output decreases
- High Temperature Fluoropolymer Jacket — Flame retardant, electrically insulates the matrix and provides corrosion resistance.
- Metallic Braid — Provides additional mechanical protection in any environment and a positive ground path
- High Temperature Fluoropolymer Overjack -et — Corrosion resistant, flame retardant overjacket is highly effective in hostile, aque - ous and chemically active environments. It also protects against abrasion and impact damage.
Application Areas:
- Industrial automation systems
- Machine control
- Process control
- Motor control
- Heating and cooling systems
- Lighting systems
- Power distribution systems
- Extruder Heating(Relay)
- Hot press applications(Relay)
- HVAC systems
- Power plants
- Chemical plants
- Metal processing
- Automotive industry
- Aerospace industry
- Nuclear power plants
SRM/E -150 °C - 215 °C Self Limiting Parallel Heating Tape SRM/E
SRM/E -150 °C - 215 °C Self Limiting Parallel Heating Tape SRM/E
Features:
- Energy efficie nt, self-regulating SRM/E uses less energy when less heat is required.
- Easy to install, SRM/E can be cut to any length (up to max. circuit length) in the field.
- Field splices can be performed easily in minutes with no scrap or wasted cold sections.
- With lower installed cost than steam tracing, SRM/E features less maintenance expense and downtime
- SRM/E can be overlapped without burnout, which simplifies heat tracing of in-line process equipment such as valves, elbows and pumps.
- Because SRM/E is self-regulating, overtem - perature conditions are minimized.
- Chromalox termination, splice, tee and end seal kits reduce install ation time
Approvals:
Factory Mutual (FM) Approved, UL Listed, and CSA certified for ordinary areas. ATEX, IECEx, FM, and CSA Approved for hazardous (classified) areas when used with U Series, HL, DL, and EL accessories.
CSA and FM Approved:
- Class I, Div. 1* & 2 Groups A*, B, C, D (gases, vapors)
- Class II, Div. 1*& 2 Groups E*, F, G (combustible dust)
- Class III, Div. 2 (easily ignitable fibers and fillings
- 5 and 8 Watt Rated T3 Temperature Class
- 10, 15, and 20 Watt Rated T2D Temperature Class
CSA Only:
• CT overjacket only
ATEX Approved:
• CE2903 II 2 G Ex eb IIC T* Gb Ta -60˚C to 195˚C
IECEx Approved:
• ITS 07.0018X Ex eb II T* Gb Ta -60˚C to 195˚C
Note 1 Exception — Cable Surface Temperature shall not exceed 190°C in Class II, Div. 2, Group F; 165°C in Class II, Div. 2 Group G.
Construction:
- Twin 16 AWG Copper Buss Wires — Provide reliable electrical current capability
- Semiconductive Polymer Core Matrix — “Self-Regulating” component of the cable, its electrical resistance varies with temperature. As process temperature drops, the core’s heat output increases; as process temperature rises, the heat output decreases
- High Temperature Fluoropolymer Jacket — Flame retardant, electrically insulates the matrix and provides corrosion resistance.
- Metallic Braid — Provides additional mechanical protection in any environment and a positive ground path
- High Temperature Fluoropolymer Overjack -et — Corrosion resistant, flame retardant overjacket is highly effective in hostile, aque - ous and chemically active environments. It also protects against abrasion and impact damage.
Application Areas:
- Industrial automation systems
- Machine control
- Process control
- Motor control
- Heating and cooling systems
- Lighting systems
- Power distribution systems
- Extruder Heating(Relay)
- Hot press applications(Relay)
- HVAC systems
- Power plants
- Chemical plants
- Metal processing
- Automotive industry
- Aerospace industry
- Nuclear power plants
