FLOOR HEATING CABLES FOR BUILDING ENTRANCES AND STAIRS

De-Icing and Snow Melting Regulations

The ETO2 is an intelligent ice and snow melting thermostat developed for hydronic or electric heating systems. This device provides economical control by minimizing energy consumption with the data it receives from temperature and humidity sensors. When snow or ice is detected, the system automatically activates and keeps the surfaces clean. With its energy-saving operating principle, it is environmentally friendly and provides 66% CO2 savings.

Application Areas:

• Ground Heating Systems: Used to prevent snow and ice formation in open areas (sidewalks, roads, ramps).
• Roof and Gutter Heating Systems: Prevents ice and snow accumulation in gutters and roof surfaces, ensuring water drainage.
• Industrial Use: Used to increase safety in factory areas, airports, and logistics centers.
• Residential and Commercial Buildings: Provides protection against snow and ice formation in places such as villas, hotels, and shopping malls.

Dual-Zone Snow and Ice Thermostat

The EM 524 90 is a dual-zone ice detector designed to control ice and snow melting systems in open areas such as roofs, gutters, garage entrances, ramps, and stairs. By analyzing temperature and humidity data from sensors, it only activates the heating system when there is a risk of ice formation, preventing unnecessary energy consumption and saving up to 80% of energy.

This detector features automatic sensor detection, an LCD display, twin LED indicators, and programmable temperature and humidity sensitivity. With a 16A switching capacity, it can efficiently control powerful heating systems.

It can be easily mounted on a DIN rail and comes with factory preset settings for quick installation. Additionally, an alarm output provides warnings in case of system failure.

Application Areas:

The EM 524 90 has a wide range of applications, particularly in open areas where ice formation poses a safety risk.

• Roofs and Gutters:
  Prevents snow and ice accumulation, reducing the risk of roof collapses and falling icicles.
• Garage Entrances and Ramps:
  Prevents ice formation to ensure the safe entry and exit of vehicles.
• Stairs and Walkways:
  Eliminates slipping and falling hazards, improving pedestrian safety.
• Industrial Facilities and Warehouses:
  Controls heating systems efficiently to ensure safe pedestrian and vehicle traffic in outdoor areas.
• Airports and Transportation Areas:
  Can be used to prevent ice formation on runways, helicopter landing zones, and loading areas.
• Satellite Dishes and Antennas:
  Prevents ice accumulation on satellite dishes, ensuring uninterrupted signal reception during winter.

ETO2 Eco-Friendly Ice & Snow Melting Controller

ETO2 is an advanced temperature control unit designed for maximum efficiency in ice and snow melting systems. With intelligent sensor support, it activates only when snow or ice is detected, ensuring energy savings. Its dual-zone control feature allows the simultaneous management of two separate areas (e.g., roof and parking lot). The programmable settings enable customization according to various weather conditions and user requirements. With a 16A relay capacity, ETO2 is compatible with both electric and hydronic heating systems.

Application Areas:

• Ice melting systems for roofs and gutters
• Snow and ice prevention on parking lots and roads
• Industrial areas requiring safe surface control
• Energy-efficient heating management in winter conditions

ETR2 Ice & Snow Melting Controller

ETR2 is an intelligent and energy-saving temperature control unit designed for small-scale ice and snow melting systems. It activates only when ice or snow is detected, preventing unnecessary energy consumption. It provides single-zone control and is ideal for underfloor heating, roof gutters, and driveways. Its user-friendly interface allows easy programming and personalized temperature settings. With a 16A relay capacity, it is compatible with various ice detection sensors. The IP20 protection rating ensures safe use in dry environments.

Application Areas:

• Ice melting systems for roofs and gutters
• Ice prevention on sidewalks and walkways
• Safe heating for small-scale parking areas
• Energy-efficient snow and ice melting management

ETOP Control Unit

ETOP is an industrial-grade temperature control unit developed for ice and snow melting systems, ensuring reliable performance in harsh environmental conditions. It features a robust control mechanism with 3 x 30A relay outputs. With its sensor-supported smart operation, it activates only when ice or snow is detected, promoting energy efficiency. Its waterproof and reinforced enclosure allows for safe outdoor use. Managing a single zone, ETOP is ideal for large-area snow and ice control. The user-friendly interface enables easy customization of temperature and system settings.

Application Areas:

• Ice melting systems for parking lots, roads, and sidewalks
• Snow prevention for roofs and gutters
• Safe surface control in industrial and commercial areas
• Large-scale heating management in extreme winter conditions

ETOG Ground Sensor

ETOG is a high-precision ground sensor developed to maximize efficiency in ice and snow melting systems. It measures both temperature and moisture levels, ensuring that the heating system activates only when snow or ice is detected, preventing unnecessary energy consumption. Its durable and waterproof design allows for safe outdoor use. Available with 10m or 25m cable options, it adapts to various installation needs. It can also be integrated with the ETOK-1 mounting kit, allowing protected installation inside a sensor tube for enhanced durability.

Application Areas:

• Ice and snow melting systems for parking lots, sidewalks, and roads
• Ice prevention applications for roofs and gutters
• Surface safety control in industrial and commercial areas
• Energy-efficient heating management in cold climates

ETOG-56

ETOG-56 is a ground sensor developed to enhance energy efficiency and prevent unnecessary energy consumption in ice and snow melting systems. The sensor measures ground temperature and moisture levels, ensuring that the heating system activates only when snow or ice is detected. This improves overall system performance while reducing energy costs. ETOG-56 comes with a 25m cable, making it adaptable for various installation needs. Additionally, it can be integrated with the ETOK-1 mounting kit, allowing for sensor installation inside a protective tube, increasing its durability against environmental factors.

Application Areas:

• Ice and snow melting systems for parking lots, sidewalks, and roads
• Ice prevention solutions for roofs and gutters
• Safe surface management in industrial and commercial areas
• Energy-efficient heating control in cold climates

ETOR-55-US224 Humidity Detection Sensor

ETOR-55-US224 is a specialized moisture detection sensor developed to prevent ice formation and maximize energy savings. It detects water accumulation, moisture, and ice buildup, ensuring that the heating system activates only when necessary, reducing unnecessary energy consumption. With a 10m cable, ETOR-55-US224 allows flexible installation in various roof and gutter applications. Its durable and waterproof design ensures long-lasting performance under harsh weather conditions. The sensor is fully compatible with other ice and snow melting systems and integrates seamlessly for optimal performance.

Application Areas:

• Ice prevention systems for roofs and gutters
• Industrial and commercial building roof drainage management
• Energy-efficient ice melting management in cold weather conditions
• Parking lots and large surface water drainage systems